Micromax Q413 Flash File Download (Stock Firmware)

Micromax Q413 Flash File Download (Stock Firmware)

Download V1
Download Micromax Q413 Flash File V1
Download V2
Download Micromax 413 Flash File V2
Download v2.1.1
Download Micromax 413 Flash File S/w v2.1.1
Download v2.0.6
Download Micromax 413 Flash File S/w v2.0.6
Download SP flash tool
Micromax Q413 USB Driver

Necessary equipment Micromax Q413 Flashing

  1. A good quality USB cable.
  2. Install USB driver Download from here.
  3. Flash tool Download from here.
  4. All downloaded files have to be extracted with Winrar
  5. Before flashing, the Mobile battery will charge 50-60%

How to Flash Micromax Q413 step by step

Step 01: Open driver folder then install the USB Driver, If you have already installed the driver on your PC, you will not have to install it again.

Step 02: NowOpen the Sp Flash Tool folder. You can see these in the picture below. Open the Green flash tool icon.

Q413 Flash File

Step 03: When Flash Tool is open click on Scatter-loading at the image below. A popup window will appear. Browse in it and go to the firmware folder extracted. Here you can get one or more txt files. Now click on it by typing MT65xx_Android_scatter.txt and clicking on it.

Step 04: Click on Download according to the image

Step 05: Now, shut down your Android set and connect it to PC with the data cable. If you can detect your mobile computer, the notification will come and download start.


Step 06: After loading 100% a small green sphere will appear in the middle of the screen. Diameter Finish the job Now open the USB cable, put the battery on the set. It will take a little longer for the first time.


Caution: Before you start the job, you should Read the whole Step properly, you can not blame me if anything on your phone. Do the full self-reliance. Backup all your personal data before flashing.

Watch this video How to Flash Micromax Q413

1 Comment
  1. nice web site i like your site thank you for share

Leave a reply

Reset Password